14/07/23
.L1.0
.L2.0
.L2.1
#008 mVControl (MIDI Volume Control)

control your Audio Device Output/Input VOlumes by using a midi controller !


DESCRIPTION:
This tool allows you to "natively" control the output/input volumes
and mute-states of your installed Audio devices by using a
MIDI-controller or -key of your choice.
Autostart and start minimized supported.
Options are accessible from tray icon contextmenu.
see included readme file for further information.
requires .NET 4 and a MIDI-capable device.

If You like this software and use it a lot - please donate !
Even small amounts are highly appreciated !



CHANGELOG:
V1.02
- release all MIDI devices when switching of MIDI input

V1.01
- tab content scrolling

V1.0
- initial release


#007 GLSL multishader Clock

A GLSL shaded clock


DESCRIPTION:
I build this one to display the current Date/Time on a wall using a Projector.
But it is also looking cool on the screen.
see included readme file for further information.
OpenGL 3.0 (or higher) required. (Should be already installed with your NVidIa /
ATI Graphics card drivers.

CHANGELOG:
V1.0
- initial release

#006 midi2master.vol

control your windows master volume using a midi controller !


DESCRIPTION:
choose a midi input device, move a midi controller and press the "learn" button to
bind it to the volume slider (or choose midi channel and controller manually).
when minimized it hides in the system tray area.
midi input can be temporarily disabled in case you require the assigned
controller in another application.
autostart and start minimized supported.
Options are accessible from contextmenu on GUI and tray icon.
see included readme file for further information.
.NET 4.0 required.

If You like this software and use it a lot - please donate !
Even small amounts are highly appreciated !



CHANGELOG:
V1.4
- set hotkey combination from systray icon to dis-/enable MIDI input
- indicate state in systray icon
- check if default audio device has changed
- check if default audio device has changed

V1.3
- added "per Channel" mode which is useful for MIDI devices
which send multiple CC IDs with one controller

V1.2
- autostart and "start minimized" added

V1.1
- bugfixes

V1.0
- initial release

#005 portable backup

backup / restore up to ten often used directories
to an external or internal harddrive.


DESCRIPTION:
if you modify or add data in specific direcories all the time,
you can define them in the tool and backup the data to a location
of your choice.
since the settings will be saved on the machine, you just need
to set them once.
the tool can run from an external hardrive via autorun.inf
which it will generate. see included readme file for further information.

CHANGELOG:
V1.0
- initial release

#004 ADFread frontend (for adfread by toni wilen)

use this batch frontend with adfread if you have a number of amiga disks to be transferred to your windows machine to ease the process.
you can use the .adf disk images with an emulator like winuae then.

since reading amiga disks sector-by-sector on pc takes some time,
the frontend supports overwrite protection of your already done diks images and
automatic numbering if you can not read the labeling due to their aGE :)


DESCRIPTION:
execute from the same folder as adsread.exe

#003 MAKE BMX VERSION tool (for JESKOLA BUZZ BMX files)

THIS VBS SCRIPT creates a .BMX and its folder named by the current date (YYMMDD)
from a template setup bmx and loads it into buzz on request.
if executed multiple times it creates versions (_02.._xx) of the last EDITED bmx file
FOUND in the current folder (\YY\YYMMDD\YYMMDD_XX.BMX).
So it provides a way to organize your worktunes.

It comes in handy if you often create new Tracks from the same setup
and require alot of savestates.
But it can be used fOR ALL KINDS OF DOCUMENTS.

CONFIGURE FOLLOWING variables in the script to your setup:

1) bmxWorkDir = "Drive:\PATH\"
Which is the LOCATION where your bmx and folder will be created.
the workdir is organized LIKE follows : bmxWorkDir\YY\YYMMDD\YYMMDD_01.BMX

EXAMPLE:
> E:\BUZZ\TRACKS\INWORK\11\110823\110823_01.bmx

2) bmxTemplateName = "xxxxxx.bmx"
Which is the name of your template/Setup bmx file.
THE template PATH = bmxWorkDir.



#002 SIMPLON III - BUZZ THEME (jeskola buzz build 1456 required)

this theme implements new funCtionalities to the buzz machineview and
due to its space-saving and slick design it is especially useful for notebook use.

CHANGELOG:
added in V3.4
- adapted for new Fullscreen mode and window theming features
(Buzz build 1456+)

added in V3.3
- Custom quicknewmachinewindow (buzz build 1443+)

added in V3.2
- support for wireless effects (buzz build 1425+)
- context menu extensions
- Custom wavetable design
- Custom scrollbars/sliders and icons





added in V3.1
- MORE ANIMATIONS
- MASTER VOLUME SLIDER changed to rotary DIAL
(< CTRL > + DRAG for more accuracy)




added in V3.0
- modified toolbar to fit on notebook screens with limited resolution
- smaller AND MORE SIMPLE machines for ADDITIONAL space in the machineview
- smaller machinewindows
- additional buttons do only show on mouseover to keep the view clean
- LEDs glow
- visual feedback (selection indicator, FADE IN/FADE OUT)
for machines MOSEOVER, LEDs, and buttons
- depending on the machinetype the button in the upper right corner
works as SOLO or BYPASS
- additionally the LED in MUTE and BYPASS mode turns grey and in SOLO mode red
- all other than the soloed machines show an passive LED



DESCRIPTION:
UNZIP into your buzz\themes folder.

#001 BUZZ sequencer MOD (JESKOLA BUZZ)

this mod (based on buzz build 1384)
adds the Ability to hide or show the new horizontal sequencer view.
since it was requested several times on buzzchurch.COM.

Besides the default setting you can also use the keyboard shortcut < ctrl + H >
while on the sequencer view to temporarly HIDE/show it.



DESCRIPTION:
UNZIP "BuzzGUI.SequenceEditor.dll" into your buzz root folder.
You might wanna Backup the existing dll first.
.L3.0
.L4.0